Cross-Cutting – Taking a sawn piece or multiple pieces of timber. Cutting to length either as fixed lengths or optimised from single or multiple cutting lists. Manual cutting can be easily done as required. Excels in the task of optimising the maximum yield possible for timber being used.

• Pusher system: The fixed pusher guides the timber into the saw. With extremely good accuracy. Very reliable pusher with low maintenance belt system.
• Touch screen: Simple touchscreen control for all adjustments. 
• Laser sensor: Used for optimization of rough material measures incoming length.
• Health & Safety: Superb health and safety features with the saw covered by the overhead guarding.
• Direct connection to the office PC (optional): Efficient transfer of data from the office to the machine. Saving much time loading sizes into the touch screen.
• Dust extraction port: Lower dust extraction port for saw blades.
• Space saving design: Means it can sit fairly close to a wall.

• Fixed pusher / 300 x 100mm – 360mm x 25mm / Pneumatic top hold down / 6.1m Pusher / Optimising – Pack cutting – manual modes / Touch screen

Sanding individual Faces – Calibrating solid, doors or base board, finish sanding of solid timber frames and veneers, denibbing lacquer in one or multiple passes.

• Sanding size: Extremely large sanding size considering the overall machine dimension. 
• Touch screen: Effortless touchscreen control for all adjustments. 
• Enormatic: Fully automatic quick setting and feed release.
• Constant Pass Line: Top moving heads, the raising and lowering of the sanding units enable thicknessing of the product. With infeed and outfeed tables if required at a constant level. 
• Health & Safety: Superb health and safety features.
• Single Button Startup: Single-button cascade start-up and highly efficient motors. 
• Sanding weight: Heavy board can be sanded due to the fixed table.
• Heavy duty: Heavy-duty steel framed body

Adjustment: Electric compensation of the abrasive belt grain thickness.

2 or 3 units / 1350mm wide x 200mm max deep. / 3-15m per minute feed speed  / 1350x2000mm sanding belt dimension /  The superb Enormatic setting system / Touch screen technology assists the operator / 18.5kw single motor / electronic compensation for the belt grit..

THE SOLID PLANE CUBE
AUTOMATIC PLANER

THE SOLID PLANE CUBE
AUTOMATIC PLANER

THE SOLID PLANE CUBE
AUTOMATIC PLANER

Primary functions:

Four-sided planing – Taking a sawn piece of timber and in one pass plane all 4 faces and straighten.

Key features:

• Planing size: Extremely large planing size considering the overall machine dimension. 
• Touch screen: Very simple touchscreen control for all adjustments. 
• Laser preview: Lasers previewing the sawn material before planing. 
• Health & Safety: Superb health and safety features with entrance gate and workpiece monitoring. 
• Single Button Startup: Single-button start-up and highly efficient motors. 
• Dust extraction port: One dust extraction port and specially designed cutter block hoods. 
• Heavy duty: Heavy-duty durocem body
• Can be repositioned: The Cube 3 can be repositioned in the workshop using a pallet truck.
• Weinig Easylock knives: (add details here)

Basic spec:

4 units / 260 x 160mm max / 15 x 8mm min  / 2m straightening table / Touch screen for auto setting / throwaway tip knives on standard Weinig tooling.